BFZGD - VARFLO & VARFIL SLEEVINGS

  • MSDS: BFZGD
  • Manufacturer: VARFLEX CORP
  • Product Name: VARFLO & VARFIL SLEEVINGS
  • National Stock Number: 5970-00-959-3048
Product Identification

Product ID:VARFLO & VARFIL SLEEVINGS
MSDS Date:01/01/1987
FSC:5970
NIIN:00-959-3048
MSDS Number: BFZGD

Responsible Party
VARFLEX CORPORATION

Emergency Phone: (315)336-4400

Cage: 79074

Contractor
VARFLEX CORPORATION
ROME, NY 13440 US

Telephone: 315-336-4400

Cage: 79074

Ingredients

PIGMENTS

Fraction By Weight: 5%


ADDITIVES

Fraction By Weight: <0.5%


SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990


SODIUM CARBONATE,CAS#497-19-8

CAS: 497-19-8

RTECS: VZ4050000


CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9192

First Aid

First Aid:IF EXPSD TO GASES DURING FIRE,REMOVE TO FRESH AIR,GIVE
CPR/O*2 IF NEEDED-REMOVE CONTAM.CLOTH,FLUSH EYES/SKIN W.LG AMTS OF
WTR-SEEK MED.ATTN.

Fire Fighting

Extinguishing Media:WATER
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:HCL LIBERATED DURING COMBUSTION AND AT
500F OR HIGHER.

Accidental Release

Spill Release Procedures:PICK UP & PLACE IN SUITABLE DISPOSAL
CONTAINERS.

Handling

Handling and Storage Precautions:NONE
Other Precautions:STORE IN ABSENCE OF DIRECT SUNLIGHT AND AT 30-60%
R.H.-WASH & SHOWER NORMALLY AT END OF WORKDAY.

Exposure Controls

Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Supplemental Safety and Health
MSDS DATED 02-85/OTHER INGRED:POLYVINYLCHLORIDE RESIN/

Chemical Properties

HCC:N1
Spec Gravity:1.3
Appearance and Odor:CYLINDRICAL FIBERGLAS BRAID,PVC COATED,W.SLIGHT OD

Stability

Stability Indicator/Materials to Avoid:YES
DIRECT CONTACT WITH SILVER,COPPER CAN CAUSE CORROSION.
Stability Condition to Avoid:HEATNG TO DECOMP.BY FIRE OR EXCESSIVE TEMP
PRODUCES HCL VAPR
Hazardous Decomposition Products:HCL

Disposal

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.